Lutron Maestro 0-10-Volt Dimmer Sensor Switch, 8A, 120-277-Volt/Single-Pole or 3-Way, Neutral Wire Optional, MS-Z101-WH, White

The Lutron Maestro 0-10-Volt Motion Sensor/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron's advanced motion sensing technology. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180° field of view (900 sq. ft. major motion & 400 sq. ft. minor motion coverage. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book - ensuring lights won't turn off when you're still in the room. Use the raise/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. Easily program your dimmer sensor for customization of both the dimmer and the sensor's functions, such as timeout, low-end trim and sensor sensitivity. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The 0-10-Volt Motion Sensor/Dimmer Switch is rated to work with all drivers, up to 8 Amp LED drivers/4.4 Amp Fan (1/6 HP) with a 50mA max sink current. Install in a single pole, 3-way with existing switch or with Maestro companion switches (MA-AS/MSC-AS) to switch from up to 9 locations. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).

• Includes (1) maestro 0-10-Volt motion sensor/dimmer switch
• Motion sensor dimmer switch automatically turns on the lights when you enter the room and off when you leave; 180-degree sensor field of view (900 sq ft major motion & 400 sq ft minor motion coverage)
• Features Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers
• Smart ambient light detection senses daylight in the room and learns your preferred light level over time, so your lights stay off if it already bright
• Customize both dimmer and sensor functions for a personalized experience adjust the sensor timeout, the dimmer low-end trim and sensor sensitivity
• Single-pole/multi-location switching with Lutron maestro companion switches (ma-as) compatible with an existing mechanical 3-way switch
• Can be programmed as a vacancy-only sensor to meet title 24 requirements
• Rated for all drivers; up to 8A LED/4.4A Fan (1/6 HP) with a 50mA max sink current neutral optional
• Available in 10+ colors pairs perfectly with Lutron claro wallplates for consistent color matching (sold separately)